I was holding on to this following an upgrade of the centre stone to set a coloured gem in but I currently need windows, baths and toilets more so I'm sadly letting it go. The workmanship on this ring is stunning, as you will appreciate if you know of Steven's work, and it has a double row of pave around the edge of the halo. It previously held an August Vintage Cushion. Dimensions of centre stone were 7.08x6.92x4.74 mm Platinum ring size 6 The centre stone was unset by Steven to ensure no damage was done. As I'm a private seller any sale will be final. Pricing is USD. Shipping to the US would be $100 via international courier with New Zealand post, happy to consider other locations, please get in touch. Any import taxes / duties are the responsibility of the purchaser. Since it was made in the US there is a good chance there would be no fees for US (as returned US goods) but you may want to confirm. If you have any questions please contact me and email me at kiwipegg@yahoo.co.nz if you don;t get a reply through LT messages. Thanks!

After a lot of consideration, I'm selling this stunning ring from Good Old Gold / Steven Kirsch. This ring is now in the US and for sale through Jewels by Grace: http://www.jewelsbygrace.com/new-additions/1-38ct-asscher-cut-diamond-gia-k-vvs1-halo-by-steven-kirsch I purchased 3 stones in 2013 and have found that as much as I adore this one, it is just not getting the same amount of wear as my other two and with some major house renovations on the horizon, the cash is needed elsewhere. This is the link to the diamond - it is a 1.38ct K VVS1: http://www.goodoldgold.com/diamond/10272/ And Youtube video: http://www.youtube.com/watch?v=tUp5k8zjMrE This is my original PS thread with all 3 rings: http://www.pricescope.com/forum/show-me-the-ring/gog-meets-steven-kirsch-3-times-avc-mrb-and-an-asscher-t197454.html More than happy to answer any / all questions or you can reach out to Grace. I can be reached at: kiwisailor123@gmail.com

Platinum 4mm version of the BGD scattered diamond band (which is based on the Tiffany Etoile band).size 6 1/8. I requested the band to be 4mm with 10 x 0.025ct melee (i.e. 2.5 points each) which is almost spot on the Tiffany band specs. The standard band on their site is 5mm with 0.02ct melee. The diamonds are BGD signature H&A melee. Selling as I've lost quite a bit of weight since I purchased it and it's now way too big and can't be resized. The band has developed a bit of patina (which I personally prefer to the high polished finish) but happy to have it re-polished prior to shipping if the buyer prefers. Happy to cover shipping to the US, contact me for other countries. As I'm a private seller all sales are final and paypal only please. Note the first two images are the original glamour shots and the remainder are of the band as it looks today - just to avoid any confusion! Please email me at kiwipegg@yahoo.co.nz if I don;t reply through the message service.

Due to an upgrade i'm selling my previous setting. The setting was originally made for a 1.61ct RB and then held a 1.56ct August Vintage Round. The RB measured 7.53 x 7.50 x 4.65 and the AVR measured 7.17 x 7.21 x 4.86. The setting is currently sitting with GOG in NY and the photos of the setting alone were taken by them. I have also attached two photos to show how the ring looked with the original RB. Steven stated the size as being a tight 5.5. As I'm a private seller sales are final and the setting will be shipped from GOG in NY (I personally live in New Zealand). I have a couple of extra photos if you'd like. Email me at kiwipegg@yahoo.co.nz if you have any issues with loupetroop messages. Thanks!

Very, very sorry to say good bye to this but I have a house to build and needs must :-( CvB "Exeter" band, 3mm, platinum size 6. Full eternity except for one section which has been left plain to allow for resizing. Stunning band made by the awesome Caysie van Bebber with OECs. I understand from Caysie these stones have been reclaimed from old pieces so they are all a little bit different but all are little fireballs. Note there is one stone which looks like it might be chipped (it was like this when I received it) - see picture attached below. I raised this with Caysie and she offered to send a replacement stone but I never got around to doing anything about it. I live in New Zealand and didn't fancy having a local jeweller try to replace it, and it was all a bit too hard to send it back, and it didn't bother me unless I looked though a loupe, so I left it. I'm happy to contact her and get a replacement or the buyer can arrange to send it to her once they have had a look if it bothers them. Lightly worn Insured shipping to USA included, contact me for other locations. Sales are final as I'm a private seller, thanks for understanding. Pricing is in USD. Note - only the Exeter band (the one with ocatgonal bezels) is inlcuded in this listing, shown with the other 2 bands I'm selling for reference only. Email me at kiwipegg@yahoo.co.nz if you have any issues with loupetroop messages.

Very, very sorry to say good bye to this but I have a house to build and needs must :-( CvB "Corsica" band, 3.5mm, platinum size 6. Full eternity except for one section which has been left plain to allow for resizing. Stunning band made by the awesome Caysie van Bebber with rose cuts. Lightly worn Insured shipping to USA included, contact me for other locations. Sales are final as I'm a private seller, thanks for understanding. Pricing is in USD. Note - only the corsica band (the one with rose cuts) is included in this listing, shown with the other 2 bands I'm selling for reference only. Email me at kiwipegg@yahoo.co.nz if you have any issues with loupetroop messages.

Very, very sorry to say good bye to this but I have a house to build and needs must :-( CvB "Alexandira" band, 2.9mm, platinum size 6. Full eternity. Stunning band made by the awesome Caysie van Bebber with french cuts and melee. Lightly worn Insured shipping to USA included, contact me for other locations. Sales are final as I'm a private seller, thanks for understanding. Pricing is in USD. Note - only the Alexandria band (the one with the french cuts and quatrefoils) is inlcuded in this listing, shown with the other 2 bands I'm selling for reference only. Quick video of this + the Exeter band here: https://vimeo.com/175454771 Password is "cvb" Email me at kiwipegg@yahoo.co.nz if you have any issues with loupetroop messages.

Still on my mission to raise funds for our crazy house build over-runs. I was holding on to this following an upgrade of the centre stone to set a coloured gem in but I currently need windows, baths and toilets more so I'm sadly letting it go. The workmanship on this ring is stunning, as you will appreciate if you know of Steven's work, and it has a double row of pave around the edge of the halo. It previously held an August Vintage Cushion (in fact this one - http://www.goodoldgold.com/diamond-search/1.69-august_vintage_cushion-I-AGS-I-SI2-diamond-stock-14359-cert-104065029005) Dimensions of centre stone were 7.08x6.92x4.74 mm Platinum ring size 6 Currently sitting with GOG in New York (I'm personally in New Zealand), the centre stone was unset by Steven to ensure no damage was done. As I'm a private seller any sale will be final. Pricing is USD. If you have any questions please contact me and email me at kiwipegg@yahoo.co.nz if you don;t get a reply through LT messages. Thanks!

Brian Gavin Signature studs set in BGDs hand made bezel settings in 18k white gold with La Pousette backs. This is a hard size to find in ideal cut stones - you don't often see many come up in the 0.4-0.5ct spectrum. Grab them while you can! Both are AGS ideal cut, these are the certificates: https://www.agslab.com/reportTypes/pldqr.php?StoneID=1040366640136&Weight=0.46&D=1 https://www.agslab.com/reportTypes/pldqr.php?StoneID=1040366640134&Weight=0.46&D=1 The La Pousette backs are a $130 upgrade to the standard settings. The earrings are here in New Zealand but I will include shipping to the US within the list price. Contact me for other locations outside the US and I will consider on a case by case basis. Pricing in USD. As I'm a private seller any sale will be final. Payment via Paypal F&F or if you want to use the merchant arm of Paypal contact me to discuss a fee split. Mrs Box in the pictures is for photography purposes only and not included :-) If you have issues with Loupetroop messaging please contact me at kiwipegg@yahoo.co.nz. Thanks!

I'd hoped I could save some $$ by dropping down to 'K' but I wear a 'E' pendant which is my original ER diamond (and I will never change) and there is just a bit too much of a colour difference with these. On their own you'd never guess they were Ks and look perfectly white. I eventually plan to replace these with a higher colour pair when cash flow permits so am planning on keeping the settings (they are in 4 prong platinum martini baskets from ERD with 8.5mm (i.e. large) La Pousette backs) but if you are interested in them let me know - I just wouldn't be open to selling them at much of a discount as I'd have exactly the same thing remade. These are the links to the pages for the stones: http://www.whiteflash.com/loose-diamonds/round-cut-loose-diamond-3719432.htm http://www.whiteflash.com/loose-diamonds/round-cut-loose-diamond-3719428.htm Both completely eye-clean with no dark inclusions. Stones are located in New Zealand but I will cover insured shipping to the US. Payment via PP F&F. As I'm a private seller any sale will be final. Pricing is USD. If you have any questions please contact me and email me at kiwipegg@yahoo.co.nz if you don't get a reply through LT messages.

1.70 J VS2 August Vintage Round in Vatche U113 Due to funds needed elsewhere in my life I have sadly decided to go ahead and part with this stunning stone. Currently set in Vatche U113 in 5% Ruthenium platinum with claw prongs, size 5.75. Setting lightly worn with only very minimal scratching to the base of the shank (will not show up in pictures). I will take some more pictures later but let me know if you have any specific requests. As I am a private seller any sale will be final. I would prefer to transact though an accredited appraiser for a transaction of this size and David Atlas (well known on Pricescope) offers a facilitation service. David will charge the buyer an appraisal fee (around $200, I will check current rates) and will release the stone/ring when cleared funds have been received by him. The ring is currently in New Zealand but I will arrange to get it to the US. If you live elsewhere please contact me to discuss options. Stone available on its own for $13k. If you have any questions please contact me and email me at kiwipegg (at) yahoo.co.nz if you don't get a reply through LT messages.

Vatche U113 in 5% Ruthenium platinum with claw prongs, size 5.75. The diamond shown in the pictures has been sold but the ring was sent to Vatche themselves by GOG for the stone to be removed so the setting is in excellent condition. The setting is currently sitting with GOG in NY. As I am a private seller any sale will be final. If you have any questions please contact me and email me at kiwipegg (at) yahoo.co.nz if you don't get a reply through LT messages.

Extremely sad to be putting this piece up for sale but circumstances require it. Beautiful ring by the amazing and recently retired James Meyer. Centre stone is a 2.23ct purple ceylon sapphire. Not certified so best to assume the stone has been heated (Jim wasn't able to confirm either way). Set in Jim's vine and leaf style setting in 18k white gold with the bezel and wraps on the shank in platinum. Two small OEC stones set on the sides, 0.03ct total, also set in platinum. Included is the matching band, again 18k white gold with platinum wraps. Ring size 6. Pricing is USD I am a private seller so sales are final, I will cover shipping to the contintental US, please contact me for the cost of shipping to other locations. Please contact me at kiwisailor123@gmail.com if I don;t respond via LT messages