MAKE ME AN OFFER! MOTIVATED SELLER! One ladies’ diamond engagement ring and matching wedding band by Scott Kay; the engagement ring contains one, round brilliant cut diamond, mounted securely in a raised semi-bezel, on a modified, cathedral band. Size 5. Weight: 1.01 ct. as estimated by formula, with depth measurement approximated as permitted by mounting CLARITY GRADE: VS2 COLOR GRADE: G COMMENTS: The mounting has heavy-gauge, comfort-fit contours, from 4.75 – 2.4 mm. It is accompanied by its matching wedding band, the band is contoured to fit with the engagement ring and form a set.. The band is heavy-gauge, tapering from 4.0 – 2.5 mm. The platinum has a high polished finish. The rings are very well made and in very good condition. The inside shanks are stamped PLAT/ Scott Kay.

PAYMENT PENDING Clearing out the jewelry box. Up for sale is a semi mount that I am not going to use. I had it made to fit a 14x12 stone so it is for a larger stone. My stone I have pictured sitting on top. I was going to use the stone in a pendant but I do not wear jewlery anymore due to my job as a nurse. All my jewelery is just sitting so I decided to let someone else enjoy these peices as I did. This ring was 850 to have made from a picture I took of another antique emerald ring. This mount fits a 14x12 and perhaps a little size up I am not sure. It has diamonds on the band on all sides. It is micropave so they are small and I do not know the weight. I about went blind trying to count them all but there looks to be 10 on all each sides. So that is 60 on the band and around 40-42 around the stone--Just know there are alot of them and I am not sure on their specs but they do not look bad. There is one that looks a little dark but that is due to the stone being set because it wasnt there before..the same thing happened when David Klass set a ring for me and we were able to remove the dark spot from the heat but really I don't think it is that noticeable but I disclose all I can find--perhaps when you get a stone set it can be cleaned up like my other ring but it is so small it is not really noticeable The prongs are yellow in color modeled after the ring I had it made like and there are 8 prongs- They can be made into claw I had the opening made 14x12 so my stone would sit low in the prongs. It sets up around 6-7mm off the finger and just enough to fit the stone I had there without it touching my skin. I am not sure how much this ring weighs but I think I remember it being 5 grams The band in the back of the ring is coming up right at almost 2mm so it is not a thick band due to the micropave setting..makes the stone pop There is slight curve near a prong in the metal but you can barely notice it and will not be there once a stone is back in place and they heat the metal again--I am describing this in fine detail that I would want anyone to mention but it will be straightened out once set again The stone I will include in this sale for free and that is a incredible deal because the guy that made these does not make them anymore and you cannot buy one easily today if anywhere like this. It is a 14x12 emerald columbian color doublet which means a portion is quartz but he included --meaning fractured..the quartz making it look like an emerald. It looks like the real deal and was a 180 dollar stone. I bought three because they were so amazing. When I had one set the lady took it back to the guy who sets for me and he came out and said I am not going to set this stone because I can't afford to hand you 30,000 if I mess it up--I had to tell him it was a doublet and he has been in the buisness for years. He then took another look with the loupe and saw and asked me where he can buy one. I say this just so it is known the stone is really beautiful but like the ring I will not use and to sweeten the deal it is included for you to set in this ring. You may set another stone and set the emerald in something else. I would be happy to email and email pictures and will do my best to get to them as quick as I can Shipping is included in this price- US only --too many past problems with international shipping I consider this a fire sale-final sale so please view the pictures and ask any questions prior to buying--I paid way more for this to be made and the stone itself was 180--the ring was 850 I have 100% here on the forum under my name as both a seller and buyer since 2007 and on ebay with 100% since 2002

SOLD was 750...Clearing out the jewelry box because I do not wear my jewelry really anymore due to changing careers and becoming a nurse. Up for sale is one of my beloved rings. I am letting it go because it is not worn lately and I wear a different ring when I wear any at all. This was made to display and be enjoyed as I did. It is a Ritani semi mount ring setting from the masterwork series in their Bella vita halo settings which they do not make anymore. This comes from the elite rings from Ritani and what sets them apart in the halo rings from any average ring. Made in solid platinum to fit a 6mm round. I had my stone removed so it is ready for your stone and is desiged by Ritani to have minimal metal so your stone pops around the microdiamonds that are very high quality. Find a good jeweler to set your stone as bezel is harder to manage the metal and make sure they tighten the side baguettes. It is a 5,300 dollar semi mount that I managed to get for 2500 several years ago and I am letting it go because I will not wear it and I want to sell to someone who will enjoy this as well as the bargain but there is nothing wrong with this ring Model 1RZ3709btbr for .65-.75ct stone or 5.9-6.2mm the information said online for this ring. My stone was 5.99 or 6mm 80 micropave to make .24ct and 2 channel tapered custom cut baguettes on the sides to make .36ct in the color G-H and VS clarity. This information can be found on this ring. I bought it out of the display box at Bailey Banks Biddle when they had a store in Alabama..we fell in love with it in college and they had it there for 3-4 years and when they went out of business we bought it for the 2500 instead of retail. I wear a 5.75 to a size 6 depending on which finger and this fits both ring fingers. I had it sized to 5.5 and placed sizing beads at the bottom which can be removed easily to keep it from spinning so I am not sure what size to call it. This ring is sizeable but I am not sure how far up or down due to the side stones. I bought it as a 7 and sized it so I am sure a good jeweler can size it up or down a bit. 7grams on my scale- solid platinum-heavy Ebay had one of these for 1800 recently so this is an incredible bargain I am sure of it. There is no Ritani semi mount ring for this price on the internet that I could find. I am more than happy to email pics and answer questions the best I can--I consider this a fire sale-final sale to move it out --there are fees being taken out and considerable discounts here Shipping is included in the price- US only (too many past problems with international shipping) I have references here since 2007 as both a seller/buyer on the forums and on ebay since 2002 at 100%

Size 5.75 to 6.25 depending on mandrel. Previously held a 2.25 carat diamond. The band is 2.3 mm wide. Based on measurements of diamond estimated tcw is .56. These diamonds sparkle beautifully. I color SI clarity. It sits 8.1 off the finger. Stamped 14k and is white gold. Please ask questions. Returns allowed if it is not altered and buyers pays return shipping. Open to offers!

Quality White Gold Setting. I had a 2.08 Pear shaped diamond set in it. Way whiter than the picture purports.

I bought this setting from a fellow D.B.er or L.T.er. I haven't done anything with it. really nice, solid setting. Like everyone else, I have some other pieces in the making. I am Gem Queen on P.S. Will consider reasonable offers

setting description as sold to me Gold: 14K solid white gold Size: 7. Weight: 2.6 grams. Side Diamonds: 2 round diamonds, 0.32 carat total weight. Color J, clarity VS2. Center stone has been removed and not for sale. Prongs are bent and ring needs straightening. The center was a 1.1ct OEC roughly 6.45 mm x 4.02 mm. Side diamonds are very cute matching OECs. I was planning on doing a baby bezel, but never got funds together for the project. final sale,but request first offer if you ever sell them again. can take more pictures are needed. Will make awesome baby bezels.

The sale is for the setting only. The setting is in platinum and was hand forged by Aspen Diamond in Montreal (aspendiamond.com) in August 2014. It was worn from August 2014 to January 2015, when it became too small as I reached the 6th month of my pregnancy. It is currently sized at 5.25 and is made to hold an 8 mm round stone (2 carats). The ring was designed after the Victor Canera Gabriella 6 prong solitaire (https://www.victorcanera.com/rings/the-gabriella-six-prong-solitaire). There is also a Gabriella setting being sold on Jewels by Erica Grace for over 2000$. The shank measures 2 mm in width and has a barely noticeable taper towards the diamond where it becomes 1.75 mm There are two small birth stones on the inside which will be removed prior to shipment. The ring will also be buffed and polished and will come in its own box. The setting can be shipped from either Canada or the USA as we travel back and forth every few weeks so duties can be avoided if shipping within the two countries.

Princess Cut 1.5 Ct AIG certified engagement ring , set in 18 kt white gold, with 1.0 Ct wedding band also in white gold. AIG certified, appraised at $6800.00

Now considering reasonable offers! :) http://s76.photobucket.com/user/oeclove/library/ Be prepared for CONSTANT compliments with this flawless solitaire with pave. Great for stacking!! I am selling my 14k WG with pave diamonds. The diamonds go 3/4 around the setting - making re-sizing possible (it's size 6.25 now) with great coverage of diamonds around the finger. The prongs have an exquisite fleur de lis design with claw prongs and can fit a cushion/round/asscher (any stone with equal symmetry) stone anywhere between 8.0mm-8.5mmish as it is currently holding a 8.4mm OEC. The width of the shank is 1.8mm which really makes your centerstone pop. I absolutely love this setting but decided to jump onto the halo bandwagon. :) I have had this setting since last summer (I don't wear it everyday due to work) and it has been babied... it still looks brand new. It will be freshly cleaned and sparkly when it arrives at your door. Please note that the center stone is not included. Willing to accept reasonable offers!!!!!!!! I will also include the appraisal for this setting (setting is worth $2850!!). Authenticity guaranteed so shop with confidence. :) Otherwise, no returns - so please ask me as many questions as you like!

Now considering reasonable offers! :) http://s76.photobucket.com/user/oeclove/library/ Be prepared for CONSTANT compliments with this flawless solitaire with pave. Great for stacking!! I am selling my 14k WG with pave diamonds. The diamonds go 3/4 around the setting - making re-sizing possible (it's size 6.25 now) with great coverage of diamonds around the finger. The prongs have an exquisite fleur de lis design with claw prongs and can fit a cushion/round/asscher (any stone with equal symmetry) stone anywhere between 8.0mm-8.5mmish as it is currently holding a 8.4mm OEC. The width of the shank is 1.8mm which really makes your centerstone pop. I absolutely love this setting but decided to jump onto the halo bandwagon. :) I have had this setting since last summer (I don't wear it everyday due to work) and it has been babied... it still looks brand new. It will be freshly cleaned and sparkly when it arrives at your door. Please note that the center stone is not included. Willing to accept reasonable offers!!!!!!!! I will also include the appraisal for this setting (setting is worth $2850!!). Authenticity guaranteed so shop with confidence. :) Otherwise, no returns - so please ask me as many questions as you like!

I am selling a WhiteFlash Petite Champagne setting with a custom platinum head made by Quest Jewelers. Quest originally replaced the peghead in this setting to the integrated head that you see in the ring. The sale is for the setting only, which held a half carat white diamond (5.1 mm diameter, as shown in the picture). The ring is a size 4.25. The setting is made of 18K yellow gold, with diamond melee, and a platinum head. The jeweler who removed the center stone said that the prongs may need to be retipped. The setting is being sold as-is. I post as pregcurious on Pricescope. I have had 1 previous successful sale on LT. I am a private seller, and all sales are final.

For sale is a modified Scott Kay palladium solitaire setting with 2 bezeled surprise diamonds. The prongs will fit a 1.5 ct. diamond (approximately 7.4-7.5mm), and the ring is sized at 5.75. This setting retails for $1000+! Please ask all questions, as there are no returns. Ships to only U.S. addresses. Buyer pays PP fees (or PP friends & family) and shipping. Thanks so much for looking!

I am listing a brand new, unworn Ritani platinum ring from the Classic Collection. Stamped "Ritani" & "PT 950". Retails for $3550 Center stone is a CZ. Diameter 7mm (approx 1.25 carat if it were a diamond). Diamonds along ring are VS quality. Average color G. Total 0.23 ctw. Platinum Size 7. SKU: 1R1966CCR or SKU: 1RZ1966 Has not been worn. Has not been resized.

Selling my Ritani platinum single row micropave 0.20 tcw endless love setting. This setting is 2 mm wide and the basket has diamonds as well. I have placed a .78 RB diamond and also wore it with a .94 RB diamond. I wouldn't put anything over 6.5-6.7 mm in it (RB). It is 2 years old from Bailey Banks and Biddle. It is a size 6.25 and it has a full sizing area without pave for sizing purposes. Reduced from $1300 to $1000 8/21/14 Reduced to $900 8/25/14 Last reduction to $800 I am a private seller and as such will not accept returns. Please feel free to as any questions before purchasing.

necklace length:approx.17inches pearl size:about 10mm natural white drop freshwater pearl. fascinating luster, no flaw. set in cubic zircon. earrings: the same pearl as the pendant white gold over 925 sterling silver chain package: comes with Chinese silk pouch payment method:paypal shipping cost: 9 buy more, save more! combined shipping is available.

platinum setting size 3.5 but fully sizable due to design tapered baguette sides are approx 0.2ct each F/G VVS1 quality center stone is MRB 2.01ct but can be adjusted to fit a slight smaller or larger stone. please email me if you have further questions or would like more pictures. asking $1600 OBO. this is for the setting ONLY.

necklace length: roughly 17inches pearl size: approx.10mm metallic pink pearl, pendant: pearl with cubic zircon inlay luster: amazing luster chain: white gold over 925 sterling silver chain stud: pearl with cubic zircon inlay package: comes with Chinese silk pouch shipping cost:$ 9 Pay more, save more! combined shipping is available!

Solid 14 k gold moissanite cushion halo setting. Bought 2 months ago with original paperwork. Paid 1700 originally. Beautiful milgrain detail and gorgeous scroll work profile. Will take reasonable offers. Will fit anywhere from a 6.5-7.5 mm stone SETTING ONLY

Size 6.5 palladium Sophie setting with pave 3/4 around. Holds a 7-7.5mm stone. was only set one time. I thought this was the setting I wanted, but I found the one that has all the qualities I am looking for so this one is up from grabs. Brand new this setting would cost more than this, the sophie with a plain shank starts at 1795, and this one is palladium with 3/4 pave! IT is a great deal. Contact me with questions, I am willing to entertain offers. AS a private seller this is a final sell. Insured shipping is covered in the asking price.